Find & Remove Onstar Fuse: Expert Guide!

The onstar fuse is usually located in the car’s interior fuse box, which is under the dashboard area. To remove it, locate the fuse’s position label and gently pull it out with a fuse puller or tweezers.

Onstar is a popular in-vehicle safety, security, and connectivity service that integrates advanced auto technology and emergency assistance. Sometimes, however, the onstar system may not function correctly, and it may be necessary to remove the onstar fuse to reset the system.

If you find yourself in that situation, knowing the location of the fuse and how to remove it can be beneficial. In this article, we’ll go over the basics of where the onstar fuse is normally found and how to take it out properly to ensure that your onstar system is reset without any issues.

Find & Remove Onstar Fuse: Expert Guide!


Locating The Onstar Fuse

When it comes to locating the onstar fuse in your vehicle, it can be a bit of a task, depending on the make and model of your car. Here’s a helpful guide to assist you in finding the onstar fuse in your vehicle.

Explanation Of Where The Onstar Fuse Is Typically Located

The onstar fuse is typically located in the fuse box under the hood of your vehicle. However, in some cases, it may be in the fuse box located inside the car. The fuse box is usually labeled, indicating what each fuse controls.

Description Of How To Identify The Correct Fuse

Identifying the correct onstar fuse is relatively easy. The fuse box lid or manual provided will indicate what the specific fuse controls. Make sure to check that the fuse is related to onstar services before removing it. Usually, the onstar fuse is labeled as onstar or even “communications fuse.

Tips For Finding The Fuse In Different Makes And Models Of Vehicles

Different car makes and models have different fuse box locations, so it is essential to refer to the vehicle’s manual. If you can’t find the fuse box under the hood, it may be in the passenger compartment. Check either under the dashboard on the driver’s side or behind a panel on the side of the center console.

Locating and removing the onstar fuse in your vehicle requires some attention to detail, but it’s a relatively straightforward process. Refer to your manual, and you’ll have the fuse removed in no time!

Removing The Fuse

Removing the fuse:

Step-By-Step Instructions For Safely Removing The Onstar Fuse

If you’re having trouble with your onstar system and you need to remove the fuse, it’s essential to do it safely to avoid causing any damage to other electrical components. Here’s a step-by-step guide to safely removing the onstar fuse:

  • Turn off your vehicle ignition and ensure that all the power to your car is off.
  • Open the passenger-side fuse cabinet located under the dashboard.
  • Use a properly-rated fuse puller or pliers to grip the edges of the fuse.
  • Firmly pull the fuse out of the holder.
  • Hold the fuse securely between your fingers to avoid dropping it.

Description Of Common Tools Needed For Removal

To safely remove the onstar fuse, you’ll need a few essential tools:

  • A sufficiently rated fuse puller or pliers to grip the fuse’s edges.
  • A flashlight, if the fuse box is located in a dimly lit area.

Remember, using the wrong tool to remove the fuse can cause damage to the fuse holder and other electrical components.

Tips For Minimizing Damage To The Fuse And The Surrounding Components

While removing the onstar fuse, take extra care to minimise any potential damage. Here are a few tips to help you avoid causing damage to the onstar fuse and its surrounding components:

  • Never use anything metallic to remove the fuse as it can cause a short circuit and result in damage to the electrical system.
  • Always use a fuse puller or pliers to remove the onstar fuse.
  • Hold the fuse carefully and securely between your fingers to avoid dropping it and causing damage to the surrounding components.
  • Inspect the removed fuse and ensure that it’s in good condition. If the fuse is burnt or damaged, replace it with a new one.

By following these tips, you can safely remove the onstar fuse without causing damage to other electrical components. Remember, if you’re unsure about removing the fuse, seek professional help from your trusted mechanic or technician.

Alternatives To Removing The Onstar Fuse

Explanation Of Other Options Available To Deactivate Onstar

There are other options available to deactivate onstar apart from removing the onstar fuse. Different vehicles have different options, and it is important to know which one will work best for your specific situation.

Some of these alternatives include:

  • Calling onstar customer service to cancel your subscription: If you do not want to use onstar anymore, calling the customer service number is a simple way to cancel your subscription. This is fast, and you won’t have to worry about finding the onstar fuse.
  • Using the onstar website to cancel your subscription: Another option to cancel your subscription is by visiting the onstar website and doing it online. This method is easy, and you won’t have to interact with anyone.
  • Using an onstar disablement service: Some companies offer disablement services that allow you to deactivate onstar. This may cost you some money, so it is important to have a look at all the options available before choosing this route.

Pros And Cons Of Each Alternative Method

Each alternative method to remove onstar has its pros and cons, and it is important to evaluate them to determine the best option for your situation.

  • Calling onstar customer service to cancel your subscription:


  • Simple and fast
  • Allows you to cancel onstar without any hassle
  • You don’t have to look for the onstar fuse


  • You may have to wait on hold for a while
  • You will have to interact with customer service, which could take up some time
  • Using the onstar website to cancel your subscription:


  • Easy and convenient
  • Allows you to cancel your subscription without any human interaction
  • Can be done from anywhere


  • You may need to remember your onstar login details
  • You may have to face some website glitches
  • Using an onstar disablement service:


  • Allows you to completely disable onstar
  • You don’t have to do it yourself
  • You can be sure that onstar is disabled


  • This method may cost you some money
  • You may have to wait for the service provider to show up

Tips For Choosing The Best Option For Your Specific Situation

Choosing the best way to deactivate onstar depends on your specific needs and situation. It is important to consider the following factors:

  • The cost: Some options like disabling onstar using a service provider may cost you money. Ensure that you have a budget for it.
  • The simplicity of the process: If you want to cancel your onstar subscription quickly, using customer care services is the best option.
  • The effectiveness of the method: Consider the effectiveness of the option you choose. If you want to be 100% sure that onstar is disabled, using an onstar disablement service could work best.
  • Your technical know-how: Removing the onstar fuse requires some technical know-how. If you don’t have it, better choose another option.

There are many ways to deactivate onstar without removing the onstar fuse. However, it is important to know the pros and cons of each option and evaluate them in line with your specific situation.

Frequently Asked Questions On Where Is The Onstar Fuse Located At And How To Remove It?

What Is The Purpose Of The Onstar Fuse?

The onstar fuse provides power to your car’s onstar system. It also protects the system from electrical damages.

How Do I Locate The Onstar Fuse?

The onstar fuse is typically located in the main fuse box under the hood or inside the car. Check your car manual or fuse box cover for specific details.

How Do I Remove The Onstar Fuse?

Turn off your car engine, locate the onstar fuse, use a fuse puller or pliers to gently remove the fuse from the panel.

Can I Still Drive If I Remove The Onstar Fuse?

Yes, you can still drive the car without the onstar fuse. However, if your onstar system is activated, be prepared for some warnings and alerts when you remove the fuse.

Will Removing The Onstar Fuse Disable Other Car Functions?

No, removing the onstar fuse will not affect other functions of your car, but it will disable the onstar system completely.


Finally, we have come to the end of our journey discussing the onstar fuse’s location and how to remove it. We hope this guide has been helpful in giving you enough information and guidance. It is always important to ensure you have the right tools and follow the correct procedures when working on any fuse box to avoid any accidents.

We recommend seeking the assistance of a professional auto mechanic if you are not confident in how to proceed. Remember, the fuse box plays a vital role in ensuring your vehicle’s optimal functionality. Hence, utmost caution should be taken when handling it.

Proper maintenance of the fuse box, including regular checks, cleaning, and replacement of damaged fuses, is essential for the longevity of your car. Happy driving, and stay safe!